Basic Info.
Certification
CE, ISO, ISO9001, ISO14001, and OHSAS18001
Installation
Method
Vertical
Medium Material
PTFE Coated Polyester Fiber
Dust Collecting Method
Laser Smoke Exhaustor
Type
Filter Cartridge Dust Collector
Model of Dedusting
Automatic Dedusting
Air Intake Dimension
Diameter 350
Compressed Air Requirement
0.5~0.6MPa
Name
Laser Smoke Exhaustor
Transport Package
Ply Wooden Bases/Paper Box/Wooden Box
Specification
1100mm*1100mm*2600mm
Product Description
Laser cutting dust collector fume extractor plasma smoke exhaustorPart 1: Why use laser smoke exhaustor
With the development of science and technology, the degree of automation is increasing. From flame cutting to plasma cutting, laser cutting and other production techniques have been continuously promoted and popularized. And these efficient production technologies have also led to more and more serious pollution problems, resulting in more dust in the workplace. Dust remover is imperative before cutting technology is effectively promoted. The cutting gun on the cutting frame can be installed more, and the cutting ability and cutting thickness are continuously increased, more and more harmful smoke and gas produced by the flame. The efficiency of plasma cutting and the continuous increase of cutting thickness make the cutting smoke rising to a surprising extent. Laser cutting produces more subtle soot that is often overlooked, but that is more harmful to the human body. Choose a removal system with good dusting effect and low cost, it is not only the initial investment of the equipment, but also the stability and energy saving that the system runs. We can provide the most effective solution according to the actual situation of the customer, and minimize the harm of cutting smoke.Part 2: Techinical discriptionLaser fume extraction hood is widely used in robot laser cutting fume collection. laser cutting robot is very flexible and fast. It can be used in many different type workpieces. Now more and more factory production begin to used it. However, high effect robot cause large amount industiral fume. It pollutes the working environment and damage workers health.
As professional manufacture in dust collection system, we design fume extraction house to solve the problem.
Laser fume extraction house is an effective and economy way to collection fume.Build a room to cover the robot. When the fume appear, it can be suck before it is spread. Part 3: WLC series machine featureLaser smoke exhaustor includes fan, generator and filter unit which is compact structure, smaller floor area, low noise processing equipment. It fully combined with the user's long-term use of feedback, new design patents which make site use and maintenance more convenient and humane.
Exterior design
Industrial esthetics design, the overall incline of the hard design style. The strong sense of military-style appearance shows the good quality and rigorous process of the equipment. The whole of the light color system makes the vision more clear, and it eliminates the dull and depressing that the mechanical equipment brings, it is more friendly of the man-machine operation.
Engine block structure
All structures are made of high quality cold-rolled steel plate, and the laser cutting is used to press the forming process. The structure design is reasonable, compact and durable. The body adopt corrosion resistant spray treatment, it can be used in all kinds of harsh environment, and it is durable. In the case of potential fire hazard, the spark catcher can be installed to prevent the spark from entering the inside of the device.
Filter unit
The dust deflector can be used to protect the air flow and the filter core from the damage of large particles. The filter unit adopts the vertical cover type filter core to quickly install the method to facilitate the removal and maintenance of the filter core The filter unit adopts the quick installation that is vertical end cover type filter. It can be more easier to install and maintain. Vertical filter core make cleaning the ash more thoroughly. The filter core has larger filtration area, lower wind speed and longer life. The filter element adopts imported polyester coated filter material with good air permeability and 99.9% filtration precision that can meet emission requirement.
Fan unit
Fan impeller: the blade and wheel cap is formed integrally through pressing. It is precision positioning, high performance of aerodynamics, high efficiency, low noise and stable performance. Balance level<=4.0(National standard).
Imported motor:
The energy consumption and the rate of the heating is 10% lower than the domestic motors at the same condition. It is low noise with the inner muffler when it working. The min. noise can reach 65db. The noise of different power filters is slightly different.
Control system
The outside hanging design of the control system can be installed according to the requirements of the operating environment of the equipment. The installation position is more flexible, which reduces the pollution of the internal dust to the electrical components and extends the service life. The control system adopts PLC automatic control. According to the difference working condition, our professional engineers can specifically run the program.Part 4: Techical parameter of Laser cutting dust collector fume extractor plasma smoke exhaustor| Mode | WLC-4YT | WLC-6YT | WLC-9YT | WLC-12YT | WLC-16YT |
| Voltage/Phase/frequency | 380V/3PH/50HZ | 380V/3PH/50HZ | 380V/3PH/50HZ | 380V/3PH/50HZ | 380V/3PH/50HZ |
| Air volume | 4000m³/h | 6000m³/h | 9000m³/h | 12000m³/h | 16000m³/h |
| Engine power | 5.5kw | 7.5kw | 11kw | 15kw | 18.5kw |
| Filter efficiency | 99.99% | 99.99% | 99.99% | 99.99% | 99.99% |
| Filter | 4-Φ324*860mm | 6-Φ324*860mm | 9-Φ324*860mm | 12-Φ324*860mm | 16-Φ324*860mm |
| Anti-blow valve quantity | 4 | 6 | 9 | 12 | 16 |
| Ash bucket capacity | 40L | 60L | 60L | 114L | 2*81L |
| dB | <75db | <75db | <75db | <80db | <85db |
| Compressed air requirement | 0.5-0.6MPa | 0.5-0.6MPa | 0.5-0.6MPa | 0.5-0.6MPa | 0.5-0.6MPa |
| Outside demension | 1100*1100*2600mm | 1200*1320*2720mm | 1450*1450*2720mm | 1550*1690*2870mm | 1980*1690*2870mm |
| Air intake demension | Φ350mm | Φ380mm | Φ450mm | Φ550mm | Φ600mm |
| Option | Anti-explosion | Anti-explosion | Anti-explosion | Anti-explosion | Anti-explosion |
| Option | Frequency conversion | Frequency conversion | Frequency conversion | Frequency conversion | Frequency conversion |
| Option | Wireless remote control | Wireless remote control | Wireless remote control | Wireless remote control | Wireless remote control |
| Option | Activated carbon filtration | Activated carbon filtration | Activated carbon filtration | Activated carbon filtration | Activated carbon filtration |
1.Patent design, CE, ISO9001, ISO14001, and OHSAS18001 certificate approved.
2.Fine details design, like 2-3mm thickness metal, 80mm noise damping cutton...
3.Advanced patent design filter, 0.02-99.9% efficiency, 8000h lifetime. PTFE coated, Import from Japan. easy pass government inspection
4.Famous machine components.
5.3 years warranty on fan and motor, 1 years warranty on filter
6. Manufacture directly sales, lower price, better services and easy maintance.
.......
Part 7: Company introduction
Quickly contact us if you are interested in our products:Tel: +86 0731-86398162
Welldone Environmental Protection Equipment (Changsha) Co., Ltd
Website: welldoneexport.en.made-in-china.com
Address:
Huanghua Industrial Park, Changsha City, Hunan Province, Changsha, Hunan, China
Business Type:
Manufacturer/Factory, Trading Company, Other, Group Corporation
Business Range:
Manufacturing & Processing Machinery
Management System Certification:
ISO 9001, ISO 14001, OHSAS/ OHSMS 18001
Company Introduction:
Welldone is committed to minimizing contamination to the environment at the source by providing our customer with the best air cleaning solutions. With genuine technical know-how and fully integrated service from design to after-service, we are the leading supplier of industrial air filtration solutions in China since founded in 2014. We′re our customers′ first choice when they need state of the art dust collector, fume extractor and any innovative air cleaning solutions. Our experienced engineering team can tailor materials and processes to best-fit our customers′ need with maximized economical value.
